INVESTMENT POWDER
GOLD STAR OMEGA+
Omega+
As the volume of SLA/CAD Master-Model casting increases, the necessity for a specific powder grows. Omega+ has been designed to withstand the challenges of SLA master model casting, both in terms of expansion of the pattern within the mould and carbon removal.
Patterns from the following systems - DWS, Envisiontec, 3d Systems, Solid Scape and Invision have been successfully tested, all with exceptional quality castings and faithful reproduction of the finest details.
Use the arrow on the right for more information
GSP Quick-Spec
MSDS
HEALTH AND SAFETY GUIDANCE FOR USING SILICA BASED PRODUCTS
HEALTH AND SAFETY GUIDANCE FOR USING SILICA BASED PRODUCTS - Hindi HEALTH AND SAFETY GUIDANCE FOR USING SILICA BASED PRODUCTS - Tamil
GSP Quick-Spec
Technical Specification
Use de-ionised water
Weigh water and powder
Slurry temperature 21°C
Leave for 90 minutes to stand before burnout
Machine vacuum mixing 38:100
Hand mix then vacuum 40:100
| MACHINE VACUUM MIXING | min. |
|---|---|
| Weigh out water & powder | 0 |
| Add powder to water | |
| Mix under vacuum | 1 |
| Stop mixer and scrape blades | 0.5 |
| Mix under vacuum | 3.5 |
| Pour flasks | 2 |
| Vacuum flasks | 1 |
| Total time taken | 8 |
| HAND MIX THEN VACUUM | min. |
|---|---|
| Weigh out water & powder | 0 |
| Add powder to water | |
| Mix by hand | 1 |
| Mix with machine | 3 |
| Vacuum mixer bowl | 1 |
| Pour flasks | 1 |
| Vacuum flasks | 2 |
| Total time taken | 8 |
|
Gold Star Omega+ (0.35 MB) |
Unable to open PDF documents? Please download Adobe Reader for free from Adobe's website.
Languages